How to use a plunge router? [Everything You Need to Know]

A plunge router is one of the most powerful electric instruments available to a woodworker. There are two types of router bases available fixed base and plunge base. The plunge router, which is one of the two models, is one of the best electric equipment for woodworkers. By using the plunger model, woodworkers can add flute work to crown molding and also make sophisticated patterns in the center of the cupboard door.

Because of its high flexibility, the plunge router is essential for woodworking. It can be used to route any material, regardless of the toughness or type. It makes cuts without specific stopping and stopping points for mortises and dadoes. This machine is efficient in creating adjustable shelf holes in cabinets.

If you are confused about how to use a plunge route, this article is going to rescue you!


You are going to need the following tools before you start a woodworking service:

  • Plunge Router
  • Router bits
  • Collet
  • Gigs
  • Clamps
  • Wrench

How to use a plunge router?

How to use a plunge routerThe following steps will help you use a plunge router:

Step 1: Selecting and Configuring a Plunge Router

The first thing you should do is closely inspect the plunge router and its various components. Noting the electric motor placed between the two posts is part of the inspection. As a result, the engine should be placed on top of the spring and fixed to a flat base that will direct it in the process.

Step 2: Plunge Router Bit should be set up.

Router bits possess various shapes and sizes. They can produce angled textures, beveled corners, and tongue and groove joinery while being straight-cutting.

It’s crucial to choose the correct bit for the plunge router you’ll be using for the task. Aside from that, the router parts you need will depend on the kind of cutting you’ll be doing. Turn the router inverted and press the spindle release button at the top of the system router once you’ve chosen the bit.

Loosen the spindle nut with the wrench given, then slip the bit through the spindle and secure it clockwise. Make sure not to over-tighten the spindle.

Step 3: Place your wood on a stable surface and clamp it in place.

Place the Device into PositionSince the router bit can rotate at a high pace, clamp the working material to a stable worktable. Correspondingly, the plunge router has a stronger propensity to spin the material rather than drill into it. As a result, using a non-skid surface router will help you by keeping you on the safe side. The router will be able to dig without any problem after you secure the working material.

Step 4: Protect Yourself from Noise.

Plunge routers generate a lot of noise, which can permanently damage the hearing. As a result, it is important to use hearing protection when operating. Additionally, during the procedure, you should wear glasses to shield your eyes from splinters or tiny chips.

Step 5: Plunge Router Depth should be set.

Plunge Router Depth should be setMeasure the depth of the groove you need to carve by turning the unit on its side. In order to achieve the desired depth, you need to press the depth so that it releases the springs that are holding the base of the plate and push the plate up.

Set up the device in your exact cutting location by releasing the depth guide’s lever and locking the base plate into place. To get precise measurements, you’ll need to use a scale.

Step 6: Place the Device into Position.

Push the handle button to set the machine flush on the working material. This plunges the bit into the piece. This action modifies the comfortable setting of the router in place without damaging the material.

Step 7: Move the material into the right position.

When cutting to the outside edge of the content, shift the gadget counter-clockwise, and when plunging inside the margin, move it clockwise.

Setting the system in the correct direction reduces the need for corrections when running, resulting in improved efficiency and outcomes. When making deeper cuts that your bit can’t handle, you’ll need to use collet extension.

Step 8: Start the Plunge Router.

Plugin the material right away and place the unit in the proper spot. Hold the router with both hands tightly. To make sure the bit is in the right place, use the slot vision.

To start spinning the router, click the power button while pressing the handle button to easily plunge the bit into the functioning content.

Exert the same pressure until you gain the ideal depth. Run the router on the working wood after releasing the button. This will give perfect cutting.

Step 9: Circle Routing

Attach the router to a system arm that rotates around a set point to make perfect circles. The plunger router can easily remove the workpiece from a large blank.

Other bits should be used to carve, edge, or route the workpiece in the same way. However, you’ll need to adjust the depth gauge to the volume or scale you’re working with.

Last but not the least, in today’s woodworking store, a plunger router is an advanced tool Its implementation demands the use of the following basic techniques we discussed. You can now start your first task with a plunger router since you have a clear understanding of how to use it.

Leave a Comment

This site uses Akismet to reduce spam. Learn how your comment data is processed.