To fix a blinking sunbeam heated blanket, first unplug it, check the connections, and restart it. Sunbeam heated blankets are the perfect solution to cold winter nights, providing people with a comfortable, cozy, and warm feeling.
However, sometimes these useful blankets face technical issues, leaving people to wonder what to do. A frequently observed issue with sunbeam heated blankets is when they start blinking. If you are among the people who are dealing with this problem, do not panic.
You can easily fix your blinking sunbeam heated blanket by following a few simple steps. In this article, we will discuss the possible reasons for why your sunbeam heated blanket is blinking and how to troubleshoot the issue efficiently.
Credit: www.sunbeam.ca
Common Causes Of Blinking Lights
Understanding the reasons behind blinking lights on your sunbeam heated blanket
Have you ever curled up in bed with your sunbeam heated blanket only to be greeted by blinking lights? Don’t panic as this is a common issue faced by many users. Blinking lights signify a problem with the blanket’s heating mechanism, and several underlying reasons could cause it.
Here are some of the most common causes of blinking lights on your sunbeam heated blanket.
Faulty Connections
A faulty connection could be the primary reason for blinking lights on your sunbeam heated blanket. The electric cord that connects to the blanket needs to be attached firmly to the wall and the control module. If the connection is loose or insufficient, it can lead to irregular power supply, resulting in blinking lights.
- Check the connection of the blanket cord to the control module and wall outlet.
- Inspect the cord for any wear and tear or cuts that could be affecting the wiring.
- Make sure that the plug is firmly attached and that you have a proper power supply.
Blown Fuse
A blown fuse is another common reason for blinking lights on your sunbeam heated blanket. When the fuse of the blanket is blown, there is an incomplete circuit which causes the blanket to turn off. If the blanket overheats or there is an electrical surge, it causes the fuse to blow and the blanket to stop working.
- Check the control module for a blown fuse.
- Replace the fuse with a new one of the same amps.
- Check the manufacturer’s instructions that came with the blanket to ensure you are using the correct fuse.
Control Module Malfunctioning
Your sunbeam heated blanket’s controller is responsible for regulating the blanket’s temperature, and if it stops working, the blanket will start blinking. A dysfunctional control module could cause the blanket to heat up or switch off at irregular intervals, resulting in blinking lights.
- Check the control module for any physical damage or malfunctioning.
- Unplug the blanket, re-attach the control module, and plug it back in.
- Check the connection to the blanket and make sure it is firmly attached.
Blanket Overheating
Finally, an overheated blanket is another reason that causes the blanket to blink. Overheating usually happens when you have the highest setting on the controller, and the blanket gets too hot, causing the sensor to trigger and shut down the heating mechanism.
This can cause the controller to blink, and the blanket will stop heating.
- Ensure you use your blanket per the manufacturer’s instructions.
- Avoid using the highest temperature setting for too long.
- Allow your blanket to cool down before using it again.
Several reasons cause the blinking lights on your sunbeam heated blanket, but most of them are fixable. With a little troubleshooting, patience and following manufacturer’s instructions, your sunbeam heated blanket could serve you for many more cozy winter nights to come.
Steps To Troubleshoot Blinking Lights
Are you dealing with a sunbeam heated blanket that’s blinking and not functioning properly? Don’t panic. Here is a step-by-step guide to examine and troubleshoot your sunbeam heated blanket.
Step 1: Disconnect The Blanket
The first thing to do is to disconnect the heated blanket from the power source. Unplug it from the wall socket and check that the control is properly detached from the blanket. Wait for a few minutes before proceeding with the next step.
Step 2: Check Connections
Check the connections between the controller and the blanket. If the connection is loose, secure it properly. Ensure that the controller is connected to the blanket’s correct port and that the controller’s led light is on.
Step 3: Fuse Inspection
If the blanket is still not working, check the fuse in the plug. If it is burnt out, replace it with a new one of the same rating.
Step 4: Control Module Examination
Inspect the control module for any damage. Check if the pins inside the connector are bent or broken. If damaged, replace the control module.
Step 5: Examine For Overheating
If the blanket is overheating or has been exposed to moisture, an automatic safety shut-off feature may have been activated. Wait for the blanket to cool down and dry before turning it back on.
Step 6: Blanket Inspection
Inspect the blanket itself for any damage or wear and tear. Make sure the wiring is not broken or damaged. If you find any damage, do not use the blanket and replace it instead.
Now that you’ve examined the blanket step by step, you should be able to fix the blinking issue. However, if the problem persists, you may need to seek professional help. Stay warm and cozy with your sunbeam heated blanket!
Diy Fixes For Blinking Lights
Diy fixes for your sunbeam heated blanket that is experiencing blinking lights
Having a sunbeam heated blanket that is experiencing blinking lights can be frustrating, especially during the colder months. But don’t worry, there are several easy fixes that you can do yourself to solve the issue. Here are some simple diy fixes that will help you get your blanket working again in no time.
Replace Faulty Connections
If your sunbeam heated blanket is blinking, the first thing you should check is the power cord and controller connections. Over time, these connections can become faulty, preventing the blanket from heating properly. Here’s what you can do:
- Check all the connections and make sure they are secure and clear of dust and debris.
- If you find a loose connection, try tightening it with a pair of pliers.
- If the connections are damaged or corroded, you may need to replace them.
Replace Blown Fuse
Another reason why your sunbeam heated blanket might be blinking is because of a blown fuse. A blown fuse can be caused by a power surge or other electrical issue. Here’s what you can do:
- Locate the fuse box on your blanket and check to see if the fuse has blown.
- If the fuse has blown, replace it with a new one that matches the same amperage rating.
- Once you have replaced the fuse, test the blanket to see if it is working properly.
Reset The Control Module
Sometimes, simply resetting the control module on your sunbeam heated blanket can solve the blinking light issue. Here’s what you can do:
- Unplug the power cord from the wall outlet and disconnect it from the blanket.
- Wait for 5-10 seconds and then reconnect the power cord to the blanket.
- Plug the power cord back into the wall outlet and turn on the blanket to see if it is working properly.
Reduce Overheating
If your sunbeam heated blanket is experiencing overheating, it can cause the light to blink. Here’s what you can do:
- Set the temperature on the controller to a lower setting.
- Avoid using the blanket for an extended period of time.
- Allow the blanket to cool down before using it again.
Repair Blanket
If all else fails, you may need to repair the blanket. Here are some simple steps that you can follow:
- First, locate the area that is causing the blinking light.
- Cut a small slit in the fabric to expose the wiring.
- Using a wire stripper, remove the damaged wiring and replace it with new wiring.
- Once you have replaced the wiring, sew the fabric back together.
By following these diy fixes, you can easily get your sunbeam heated blanket working again without any professional assistance. Just remember to check your connections, replace blown fuses, reset the control module, reduce overheating, and repair the blanket if needed.
When To Call A Professional
Knowing when you need the expertise of an electrician or the sunbeam customer service
If you own a sunbeam heated blanket, you understand how comfortable and cozy it can make your sleep. However, just like other electronic devices, you might encounter some technical issues while using it, with the ‘blinking’ being one of them.
A blinking light on your sunbeam heated blanket could indicate a minor or major problem with the device. Therefore, as an informed user, you need to know when to handle the situation with some diy fixes or call in a professional.
Here are some cases that require you to get the help of a qualified electrician or sunbeam customer service:
Explanation Of Instances Where The Issue Is Too Technical To Handle
In some cases, the blinking light on your heated blanket could indicate an issue that requires technical finesse beyond your scope. Such instances include:
- Wiring issues: If you suspect that your heated blanket has a wiring problem, do not attempt to fix it yourself. Incorrect wiring could lead to short circuits and electrical shocks.
- Damaged thermostat: A broken thermostat could lead to the device not functioning appropriately. Trying to repair or replace it yourself without the necessary technical skills could cause irreversible damage to the device.
- Other electrical issues: Some electrical issues requiring expertise include blown fuses, damaged circuits, and defective components.
Calling in an electrician or sunbeam customer service could save you from the risk of electrocution or even damaging your device beyond repair.
Importance Of Getting A Professional
- Expertise: Calling in a professional guarantees that you get quality service from a skilled technician. They have the experience and knowledge to handle any technical issues with your sunbeam heated blanket.
- Safety: Dealing with electricity requires safety measures that only a professional can guarantee. An experienced electrician has the right tools and protective gear to ensure that the work is done safely and efficiently.
- Warranty: Attempting to fix the device yourself could void the warranty, leading to a loss in case the device malfunctions in the future.
While some blinking issues with your sunbeam heated blanket could be fixable, some problems require the expertise of a trained professional to avoid accidents and damages to the device. Hence, it is essential to understand when to call in an electrician or sunbeam customer service.
Remember to stay safe at all times and follow the manufacturer’s guidelines in case of any technical issues.
Frequently Asked Questions On Sunbeam Heated Blanket Blinking
Why Is My Sunbeam Heated Blanket Blinking?
Your sunbeam heated blanket may be blinking due to a loose connection or an error in the control unit.
How Can I Reset My Sunbeam Heated Blanket?
To reset your sunbeam heated blanket, unplug it from the outlet, wait for a few minutes, and then plug it back in.
Can A Blinking Light On My Blanket Be Fixed?
Yes, blinking lights on your sunbeam heated blanket can be fixed by troubleshooting the problem or replacing parts.
Is It Safe To Use A Flashing Blanket?
It is not safe to use a flashing sunbeam heated blanket, as it can indicate a short circuit or other electrical issue.
How Do I Prevent My Blanket From Blinking In The Future?
To prevent your sunbeam heated blanket from blinking in the future, follow the manufacturer’s instructions for use and care, and avoid folding or bending the wires excessively.
Conclusion
A blinking sunbeam heated blanket can be an indicator of several issues. Remember to check for a loose connection, remove any excess blankets or clothing from the surface, and make sure the controller is functioning correctly. If none of these solutions work, it may be time to contact the manufacturer for assistance.
Maintaining your blanket properly, including cleaning it regularly and storing it correctly, will also help prolong its lifespan. Overall, a sunbeam heated blanket can provide warmth and comfort on cold nights, but it is important to address any issues quickly to ensure safe and effective use.
With the proper care and maintenance, your sunbeam heated blanket can continue to provide cozy nights for years to come.
