The Fitbit Charge 3 must be included on any list of the top fitness trackers available today. You cannot find any perfect device, so it’s normal to find some issues with your Fitbit Charge 3.
It is not rare to notice that your Fitbit Charge 3’s screen is not working. It’s possible that there are a lot of causes for this, but the issue can be fixed by doing a few easy steps.
Continue reading to learn what to do if the screen on your Fitbit Charge 3 screen is not working.
Fitbit Charge 3 Screen Not Working but Vibrates
If you’re a Fitbit Charge 3 owner, you may have noticed that your device’s screen isn’t working as it should. The good news is that this appears to be a relatively common issue, and there are a few things you can try to fix it.
First, make sure that the screen is clean and free of any debris or fingerprints.
If that doesn’t help, try restarting your Charge 3 by holding down the button on the left side of the device for 20 seconds.
If your problem still exists, you may need to factory reset your tracker, which will erase all data stored on it.
To do this, hold down the button on the left side of the device for 15 seconds while connected to the charger.
You should see a smiley face icon appear on the screen when the reset is complete. We hope these tips help get your Fitbit Charge 3’s screen back up and running!
Fitbit Charge 3 Screen Not Working After Reset
If you’ve been having trouble with your Fitbit Charge 3 and a reset hasn’t fixed the problem, you may be wondering what to do next.
One possible solution is to try a factory reset. This will erase all of your data and settings, so make sure you back up any important information first.
To do a factory reset, press and hold the button on your tracker for about 8 seconds. You’ll see the screen flash and then reboot. Once it’s finished restarting, all of your data will be erased, and you can start fresh.
Fitbit Charge 3 Can’t See Screen in Sunlight
Are you struggling to see your Fitbit Charge 3 screen in the sunlight? You’re not alone! Many people have this problem.
There are a few things you can do to try and improve the situation.
First, make sure that the brightness on your device is turned all the way up. If that doesn’t help, try tilting the screen so that it’s at a different angle relative to the sun.
Sometimes that can make a difference.
If neither of these options works, there isn’t much else you can do. The Charge 3 just isn’t designed to be visible in direct sunlight.
So, if you’re trying to use it outdoors on a bright day, you may just have to accept that you won’t be able to see the screen very well.
Fitbit Charge 3 Screen Has Lines
If you’ve noticed that your Fitbit Charge 3 screen has started to show lines, don’t panic! This is a common issue that can usually be easily fixed. There are a few potential causes of this problem.
One possibility is that the screen itself is damaged. If this is the case, you’ll need to replace the entire screen.
Another possibility is that there’s something wrong with the connector between the screen and the main body of the Fitbit. This is an easy fix; simply disconnect and reconnect the connector.
If neither of these solutions works, it’s possible that there’s a software issue causing the lines to appear on your screen. In this case, you should try resetting your Fitbit Charge 3.
To do this, open up the Settings app on your device and scroll down to find the “Reset” option under “About.” Tap on “Reset” and confirm when prompted. After your Fitbit has been reset, check to see if the lines on your screen have disappeared.
Fitbit Charge 3 Smiley Face Then Black Screen
If you’ve ever seen the smiley face on your Fitbit Charge 3 and then had the screen go black, you might be wondering what’s going on.
Here’s the deal: the smiley face indicates that your device is syncing with your computer or phone. Once the sync is complete, the screen will go back to normal.
So why does this happen? Well, it’s actually a feature of the Fitbit Charge 3 that allows you to save battery life. When your device is not in use, it will enter a power-saving mode where the screen will turn off.
However, if you need to check the time or see any other information on your device, simply pressing the button on the side of the Charge 3 will turn on the display again.
So, there you have it! If you see a smiley face followed by a black screen on your Fitbit Charge 3, don’t worry—it’s just doing its job to save power.
Fitbit Charge 3 Not Working
There are a number of possible reasons for this, and we’ve outlined some troubleshooting tips to help you get to the bottom of the problem. One potential reason why your Fitbit Charge 3 isn’t working is that it needs to be reset.
To do this, simply press and hold the button on your device for about 8 seconds until you see the Fitbit logo appear. Once your Charge 3 has been reset, it should start working properly again.
Another possibility is that the firmware on your Charge 3 needs to be updated.
You can check for updates by going into the Settings menu on your device and selecting the “About” option. If there’s an update available, follow the prompts to install it.
If neither of these solutions works, then it’s likely that there’s a more serious issue with your Charge 3, and you’ll need to contact customer support for further assistance.
Fitbit Charge 3 Bluetooth Connection Not syncing
After connecting your Fitbit Charge 3 to your phone, you cannot sync with the app. Make a Bluetooth connection and start using your device. But if for any reason, you were unable to connect, proceed as directed below.
- Disable Bluetooth.
- Restart both the Charge 3 tracker and the phone.
- Bluetooth is used to pair the two devices.
- Check the sync status of the Fitbit app by opening it.
- Uninstall and reinstall the app if it hasn’t been synced.
- Now try to connect once more.
Fitbit Charge 3 Screen Replacement
If you’re the proud owner of a Fitbit Charge 3, you know that this versatile fitness tracker is equipped with everything you need to stay on top of your health and fitness goals.
But what do you do when the screen becomes damaged or cracked?
Luckily, replacing the screen on your Fitbit Charge 3 is a relatively easy process that can be done at home with just a few tools.
Here In this section, we’ll walk you through everything you need to know about replacing your Fitbit Charge 3’s screen, including what tools you’ll need and how to put everything back together.
So, if you’re ready to get your Fitbit Charge 3 looking as good as new again, let’s get started!
The first step in this repair is to remove the band holders by removing two screws on either side of the Fitbit device.
The next step is removing the screen, for which you must first apply some heat to loosen the adhesive. We found that if you focus mainly on the side opposite the Fitbit logo and get under there with a thin pry tool, heat up the sides of the screen before pinning it away from the device and removing the screen by pinning it at the end opposite the Fitbit logo, being careful not to damage the ribbons that connect the screen to the board.
Next is to remove the battery, which simply pulls off, and then you can remove the shield underneath by removing its three screws. You’ll see the two ribbons from the screen attached to your board, which you can gently pry up. The other two ribbons belong to the vibrator and the charging function. So just leave those alone and reattach your new board to the same two ribbon holders as your old screen.
From there, you can reverse the process by reinserting the shield with its three screws and then reinserting the battery before closing your Fitbit device. Apply some glue around the edge of the housing where the screen will sit; we’ve only ever used this T8000 glue. So we wouldn’t recommend using anything else, and it works really well when you close the Fitbit. There will most likely be some glue escaping, which you can simply wipe clean before securing your screen with an elastic band or vice.
Then we let it sit for 24 hours, and that’s when the Fitbit Charge 3 screen repairs were completed.
Fitbit Display Not Working
Fitbit display isn’t working? There are a few things you can try to troubleshoot the issue.
First, make sure that the device is charged. If it’s not, plug it in and wait a few minutes to see if that resolves the issue.
If the device is still not responding, try restarting it by holding down the button for 10–15 seconds. If that doesn’t work, you may need to reset your Fitbit.
To do this, log into your account on the Fitbit app and go to Settings > Device Info > Reset Device.
Once you’ve reset your Fitbit, try syncing it again to see if that fixes the problem. If none of these solutions work, contact customer support for further assistance.
Frequently Asked Questions (FAQs)
Why is the screen on my Fitbit Charge 3 not working?
If your Fitbit Charge 3’s screen isn’t working, there are a few potential reasons why.
First, it’s important to rule out a software issue by restarting your tracker. If that doesn’t work, the next step is to check the charging contacts on the back of the device to make sure they’re clean and free of debris.
If those are both unsuccessful, it’s likely that you have a hardware issue and will need to reach out to customer support for assistance.
Why has my Fitbit Charge screen stopped working?
If your Fitbit’s screen has stopped working, there are a few potential causes.
First, make sure that the battery is charged. If it is, then try restarting your Fitbit by holding down the button for 10–15 seconds.
If that doesn’t work, you may need to reset your Fitbit by connecting it to the charger and holding down the button for 20–30 seconds.
If none of these solutions work, then your Fitbit’s screen may be damaged and will need to be replaced.
How Do I Get My Screen to Work on My Fitbit Charge 3?
There are a few things you may attempt to do to fix your Fitbit Charge 3’s screen if it’s not working properly.
First, make sure that the device is charged and turned on.
If the screen is still unresponsive, try restarting the device by holding down the button for 20 seconds.
In case that doesn’t work, try holding the button for 8 seconds to perform a factory reset.
Your best bet is to get in touch with Fitbit customer care if none of these solutions work.
How do I clear cached data?
As you are aware, junk files usually cause a device’s performance to decrease. The regular use of the device produces such junk files. So, what do you do? The cached data only needs to be cleared.
- Navigate to Settings > Apps.
- Press the Clear Cache Data button or choose Cache.
- Re-sync the app by opening it once more.
What Should You Do If Your Fitbit Charge Isn’t Working?
If your Fitbit Charge isn’t working properly, here are some troubleshooting tips to help fix the problem.
First, try restarting your device. If that doesn’t work, try connecting it to a different USB port or charging dock.
If your device still won’t charge, the next step is to clean the charging contacts using a dry cloth or cotton swab.
Once you’ve done that, try charging your device again.
If you’re still having trouble, there are a few other things you can try.
First, make sure that the firmware on your Fitbit is up to date.
To do this, open the Fitbit app and tap the Today tab > your profile picture > Device Settings > Software Updates > Check for Updates.
If an update is available, follow the prompts to install it.
Another thing you can try is resetting your Fitbit device. This will not delete any of your data, but it will reset all of your settings back to their defaults. To reset your Fitbit device:
- Open the Settings app on your mobile device.
- Find and select Bluetooth;
- Find and select “forget” or “unpair” from the list of paired devices;
- Press and hold down the button on your tracker for about 15 seconds until you see the smiley face icon and “Tracker Reset Complete” message (this may take up to 30 seconds).
If none of these troubleshooting tips work, it’s likely that your tracker has a hardware problem, and you’ll need to contact customer support for further assistance.
Conclusion
Maybe you are now completely aware of the problems with the Fitbit Charge 3 and how to fix them. Please inform us if you find more Fitbit Charge 3 problems that weren’t covered in this post. We’ll do our best to respond to you as quickly as we can.
Also Read: Shark Steam Mop Troubleshooting