Maytag Neptune Washer Troubleshooting

It’s not always difficult to fix a Maytag Neptune washer. Checking the power in the socket or outlet or ensuring that the door is properly closed can solve many problems with your Maytag Neptune washer. Clogged drains or hose filters cause some of the issues with this washer, while other issues are brought on by the user’s ignorance of washing cycle breaks.

If you have a problem that you can’t solve by following Maytag Neptune washer troubleshooting, you can contact the company for more help.

Maytag Neptune Washer Troubleshooting Codes

Maytag Neptune Washer Troubleshooting
Photo Credit: electros

Error codes for door issues

Several Neptune error codes are related to the status of its door. The washer won’t work if the door isn’t completely closed.

dL: The door is unlocked.

dS: Indicates that during operation, the door is open.

FL: Means fail to lock the door.

LO: Indicates that the door won’t unlock.

To fix this kind of issue, make sure the door is shut securely, select “Power Off,” and then start the washer again.

The Error Codes for Water Issues

nf: This code indicates that the washer tried but failed to fill with water.

nd: Drainage difficulties

The washer’s input or output hoses can be taken apart and cleaned of blockages to help fix loading and draining problems.

Other Issues Error Codes

dc: Notifies you of an unbalanced load.

The Maytag may be unable to spin because of this problem. Use the cycle selector dial to turn the drum back on after redistributing the load and paying attention to its weight distribution.

E3: There is a problem with the motor’s operation.

PF: Sign that there was a power outage during the wash cycle.

If you use the cycle selector to restart the cycle, you might be able to solve both the E3 and PF errors.

Critical Problem Error Codes

Several troubleshooting codes let you know about serious problems that only certified experts can fix.

Hr: That means the water heater is faulty.

LE: The washer is having problems filling with water.

Sr: Indicates when the unit’s controls require maintenance.

If your Neptune washer still shows an error code after you’ve done what the code says to do, Maytag says to contact them for help.

Basic Maytag Neptune Washer Troubleshooting

If your Maytag Neptune washing machine is giving you trouble, Then follow the below instruction to troubleshoot your problem.

First, check the manual that came with your machine to see if there are any error codes listed that can help you identify the problem.

If not, there are a few other things you can try.

One common issue with Maytag Neptune washers is that the door seal may become damaged or loose over time, causing leaks. To fix this, simply replace the door seal with a new one.

Another common problem is that the tub may become unbalanced and start making loud noises during operation. This can be caused by a build-up of lint or dirt in the tub which throws off the balance. To clean it out, simply remove the tub and wash it with soap and water. Be sure to dry it completely before putting it back in place.

Finally, if your machine just isn’t working properly, no matter what you try, it’s always best to call in a professional for help. They will be able to diagnose and fix any problems quickly and efficiently so you can get back to using your washing machine without any issues!

Maytag Neptune Washer Door Lock Problems

Maytag Neptune Washer Door Lock Problems
Photo Credit: electros

If you have a Maytag Neptune front-load washer, you may have experienced problems with the door lock. The door locks on these washers can fail for a number of reasons, including age, wear and tear, and improper installation.


  • First, check the door seal to make sure it is clean and free of any debris. If the seal is dirty or damaged, it could be preventing the door from locking properly.
  • Next, check the door latch to make sure it is not bent or broken. If the latch is damaged, it will need to be replaced.
  • Finally, check the wiring harness for any loose or damaged connections. If any of these components are damaged or not working properly, they will need to be replaced in order to fix the problem.

Maytag Neptune Washer Not Starting

If your Maytag Neptune washer won’t start, there are several possible reasons why.

  • First, check to make sure that the washer is plugged in and that the outlet it’s plugged into is working.
  • Next, ensure sure the circuit hasn’t tripped or blown a fuse by inspecting the circuit breaker or fuse box.
  • If everything looks good there, the problem may be with the washer itself. Check to see if there’s water in the tub – if so, you may need to empty it before starting a new cycle.

Finally, check the user’s manual for troubleshooting tips specific to your model of the Maytag Neptune washer.

Maytag Neptune Washer Mah5500Bww Troubleshooting

If your Maytag Neptune washer Mah5500Bww isn’t working properly, you can troubleshoot the issue by following a few things.

  • First, check to make sure that the power cord is plugged in and that the outlet is working.
  • Next, check the fuse box or circuit breaker to see if there has been a blown fuse or tripped breaker.
  • If everything looks fine there, check to see if the water supply valves are turned on all the way.

If your Maytag Neptune washer Mah5500Bww still isn’t working, it’s possible that there is an issue with the washing machine itself.

One thing you can try is resetting the washer by unplugging it for 30 seconds and then plugging it back in.

If that doesn’t work, you may need to call a technician to come to take a look at your washing machine.

Maytag Neptune Washer Diagnostic Mode

Maytag Neptune Washer Diagnostic Mode
Photo Credit: mbauction

If your Maytag Neptune washer is acting up, you can run a diagnostic test to see what’s wrong. To enter diagnostic mode,

  • First, make sure that the washer is turned off.
  • Then, press and hold the “Start/Pause” button while you turn the washer on by pressing the power button.
  • Keep holding the “Start/Pause” button until the “Add Garment” light starts flashing.
  • Once it does, release the buttons and press the “Spin Select” button four times. The washer should now be in diagnostic mode and all of the lights will be lit up.

You can now run tests on different parts of the washer by pressing the appropriate buttons. For example, to test the door lock, press and hold down both the “Soak” and “Signal” buttons at the same time for three seconds. The door should lock and then unlock after a few seconds.

If it doesn’t work properly, you’ll need to replace the door lock assembly.

To exit diagnostic mode, simply turn off the washer and then turn it back on again without holding any buttons down.

How To Reset Maytag Neptune Washer?

How To Reset Maytag Neptune Washer
Photo Credit: mbauction

If your Maytag Neptune washing machine is not working properly, you may need to reset it.

There are two ways to reset a Maytag Neptune washing machine:

  1. By pressing the Start/Stop button, or
  2. By unplugging the washer and then plugging it back in.

To reset your Maytag Neptune washing machine by pressing the Start/Stop button:

  • Press and hold the Start/Stop button for 3 seconds.
  • The washer will beep and the display will show “PF” (power failure).
  • Release the Start/Stop button.
  • Press and hold the Start/Stop button again for 3 seconds.
  • The washer will beep again and the display will show “0:00” (zero minutes).
  • Release the Start/Stop button.

Your Maytag Neptune washing machine has now been reset and is ready to use again.

To reset your Maytag Neptune washing machine by unplugging it:

  • Unplug the machine from its power source for 30 seconds
  • After 30 seconds have passed, plug back in your washer

How Do You Reset the Sensor on a Maytag Washer?

If your Maytag washer is not functioning properly, you may need to reset the sensor.

The sensor on a Maytag washer is located behind the control panel. To access the sensor, you will need to remove the control panel.

Once the control panel is removed, you will be able to see the sensor. To reset the sensor, simply unplug it and then plug it back in.


You should be able to resolve your washer issue by using the above Maytag Neptune washer troubleshooting tutorial. If the problem is still not fixed, it’s probable that a control board issue is to cause; this problem will most probably need to be fixed by a trained technician.

Are you a Maytag Centennial Washer user? Facing any problems with your washer? Then read Maytag Centennial Washer Troubleshooting now.

Leave a Comment

This site uses Akismet to reduce spam. Learn how your comment data is processed.